Beside the Submit button you will see a Reset Form button. If you have entered values in the page
without submitting, and decide to start all over again, click Reset Form. The page will then display the
values that were current when you opened the IPDS Configuration page.
9.3 Functions that Can Not be Operated Remotely
The following IPDS functions can not be operated remotely:
• Trace Functions – The current setting is shown but can not be changed.
• Print Resource List – This operation is not shown.
• Remove Resources – This operation is not shown.
• Remove User Files – This operation is not shown.
• IPDS Version – The current version is shown but can not be changed.
To operate these setting use the printer front panel menus.
9.4 Functions that Can ONLY be Operated Remotely
The following IPDS functions can only be operated remotely:
• Color Files Upload.
To Next Page
Loading...
