Lexmark XC2335 - Sending Scanned Documents; Sending an Email; Scanning to Computer

Setting Value
Require Trusted
Certificate
Disabled
Reply Address Yo u r e ‑mail address
SMTP Server
Authentication
Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID Yo u r e ‑mail address
Device Password Authorization code
Note: To create an authorization
code, from the e‑mail home page,
click Settings > More settings >
User‑end POP/IMAP/SMTP, and
then enable Authorization code
status.
Sohu Mail
Note: Make sure that the SMTP service is enabled on your
account. To enable the service, from the Sohu Mail home page,
click Options > Settings > POP3/SMTP/IMAP, and then enable
either IMAP/SMTP service or POP3/SMTP service.
Setting Value
Primary SMTP Gateway smtp.sohu.com
Primary SMTP Gateway Port 465
Use SSL/TLS Required
Require Trusted
Certificate
Disabled
Reply Address Yo u r e ‑mail address
SMTP Server
Authentication
Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID Yo u r e ‑mail address
Device Password Independent password
Note: The independent
password is provided when
IMAP/SMTP service or
POP3/SMTP service is enabled.
Yahoo! Mail
Setting Value
Primary SMTP
Gateway
smtp.mail.yahoo.com
Primary SMTP
Gateway Port
587
Use SSL/TLS Required
Require Trusted
Certificate
Disabled
Reply Address You r e‑mail address
SMTP Server
Authentication
Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID Yo u r e ‑mail address
Device Password App password
Note: To create an app password,
go to the
Yahoo Account Security
page, log in to your account, and
then click Generate app password.
Zoho Mail
Setting Value
Primary SMTP
Gateway
smtp.zoho.com
Primary SMTP
Gateway Port
587
Use SSL/TLS Required
Require Trusted
Certificate
Disabled
Reply Address You r e ‑mail address
SMTP Server
Authentication
Login / Plain
Device‑Initiated
E‑mail
Use Device SMTP Credentials
Device UserID Yo u r e ‑mail address
Setting Value
Device Password Account password or app password
Notes:
• For accounts with two‑step
verification disabled, use your
account password.
• For accounts with two‑step
verification enabled, use an app
password. To create an app
password, go to the
Zoho Mail
Account Security page, log in to
your account, and then from the
Application‑Specific Passwords
section, click Generate New
Password.
Sending an e-mail
Before you begin, make sure that the SMTP settings are
configured. For more information, see
“Configuring the e ‑ mail
SMTP settings” on page 1.
1 Load an original document into the ADF tray or on the scanner
glass.
2 From the home screen, touch E-mail, and then enter the
needed information.
3 If necessary, configure the scan settings.
4 Send the e-mail.
Scan
Scanning to a computer
Before you begin, make sure that the computer and the printer
are connected to the same network.
For Windows users
Note: Make sure that the printer is added to the computer. For
more information, see
“Adding printers to a computer” on
page 11.
1 Load an original document into the automatic document
feeder or on the scanner glass.
4