4 Remove the two screws (B), and then remove the fan.
Fuser drive motor removal
1 Remove the rear door. See “Rear door removal” on page 549.
2 Remove the fuser. See “Fuser removal” on page 556.
3 Remove the imaging unit from the machine.
4 Remove the LVPS. See “LVPS removal” on page 445.
5 Remove the left cover. See “Left cover removal (MX71x)” on page 416.
6 Remove the board housing. See “Board housing removal” on page 431.
7 Remove the main drive motor. See “Main drive motor removal” on page 428.
8 Remove the harnesses from the clamp (A).
7463
Repair information
425
To Next Page
Loading...
