What to do if my Lexmark All in One Printer says 'Cartridge very low'?
To resolve the 'Cartridge very low' message on your Lexmark All in One Printer, you may need to replace the toner cartridge soon. If you want to clear the message and continue printing, touch Continue on the printer control panel.
What to do if Lexmark All in One Printer says 'Cartridge low'?
If your Lexmark All in One Printer displays 'Cartridge low', you might need to order a replacement toner cartridge. To clear the message and continue printing temporarily, touch Continue on the printer control panel.
How to replace missing cartridge on Lexmark All in One Printer?
To clear the message on your Lexmark All in One Printer, install the missing cartridge.
What to do if Lexmark All in One Printer says 'Cartridge nearly low'?
If your Lexmark All in One Printer displays 'Cartridge nearly low', touch Continue on the printer control panel to clear the message and continue printing.
How to fix 'Check tray connection' on Lexmark All in One Printer?
To fix the 'Check tray [x] connection' error on your Lexmark All in One Printer, try the following: * Turn the printer off and then on again. * If the error persists: 1. Turn off the printer. 2. Unplug the power cord. 3. Remove and reattach the indicated tray. 4. Reconnect the power cord and turn the printer back on. * If the error continues, remove the tray and contact customer support. Alternatively, you can touch Continue on the printer control panel to clear the message and resume the job.
Why does my Lexmark All in One Printer say 'Close door or insert cartridge'?
The 'Close door or insert cartridge' message on your Lexmark All in One Printer means that the toner cartridge is either missing or not correctly installed. Insert the cartridge properly, and ensure that all doors and covers are completely closed.
How to fix 'Too many trays attached' error on Lexmark All in One Printer?
To fix the 'Too many trays attached' error on your Lexmark All in One Printer: 1. Turn off the printer. 2. Unplug the power cord from the electrical outlet. 3. Remove the extra trays. 4. Connect the power cord to a properly grounded electrical outlet. 5. Turn the printer back on.
How do I fix 'Change paper source' on my Lexmark All in One Printer?
To resolve the 'Change [paper source] to [custom string] load [orientation]' message on your Lexmark All in One Printer, you can try the following: * Load the correct size and type of paper in the tray, then specify the paper size and type in the Paper menu on the control panel. Touch Finished changing paper. * Touch Use current [paper source] to use the available paper size and type in the tray. * Touch Reset active bin to reset the active bin for a linked set of bins. * You can also cancel the print job.
What to do if Lexmark All in One Printer shows 'Complex page' error?
To address the 'Complex page' error on your Lexmark All in One Printer, you can: * Touch Continue on the printer control panel to ignore the message and continue printing. * Cancel the current print job. * Install additional printer memory.
What to do if Lexmark All in One Printer shows 'Defective flash detected'?
To resolve the 'Defective flash detected' error on your Lexmark All in One Printer, you can: * Replace the defective flash memory card. * Touch Continue on the printer control panel to ignore the message and continue printing. * Cancel the current print job.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Processor Speed | 1.2 GHz |
| Functionality | Copier, Printer, Scanner |
| Connectivity | Ethernet, USB |
| Memory, Standard | 2048 MB |
| Duplex Printing | Standard |
| Media Sizes Supported | A6, A5, B5, A4, Legal, Executive, Envelopes |
| Scanner Type | Flatbed, ADF |
| Operating System Compatibility | Microsoft Windows, Linux, Apple OS X |
To Next Page
