4
5
6
7
3
1
2
Use the To
1 EXT port Connect additional devices (telephone or answering machine) to the printer
and the telephone line. Use this port if you do not have a dedicated fax line
for the printer and if this connection method is supported in your country or
region.
Note: Remove the plug to access the port.
2 LINE port Connect the printer to an active telephone line through a standard wall jack
(RJ‑11), DSL filter, or VoIP adapter, or any other adapter that allows you to
access the telephone line to send and receive faxes.
3 Printer power cord socket Connect the printer to a properly grounded electrical outlet.
4 USB printer port Connect the printer to a computer.
5 Ethernet port Connect the printer to an Ethernet network.
6 Internal Solutions Port (ISP) or
printer hard disk slot
Note: If the printer supports
wireless connection, then
attach the wireless antenna
here.
Attach an ISP or a printer hard disk.
7 USB port Attach an optional wireless network adapter.
Additional printer setup 50
To Next Page
Loading...
