Lexmark XM7200 Series - Page 301

Reattach bin [x]
Try one or more of the following:
• Turn o the printer, and then turn it back on.
• Reattach the indicated bin.
1 Turn o the printer.
2 Unplug the power cord from the electrical outlet.
3 Remove the indicated bin.
4 Reattach the bin.
5 Connect the power cord to a properly grounded electrical outlet.
6 Turn the printer back on.
• Remove the indicated bin:
1 Turn o the printer.
2 Unplug the power cord from the electrical outlet.
3 Remove the indicated bin.
4 Contact customer support at http://support.lexmark.com or your service representative.
• From the printer control panel, touch Continue to clear the message and print without using the
specified bin.
Reattach bins [x] – [y]
Try one or more of the following:
• Turn o the printer, and then turn it back on.
• Reattach the indicated bins:
1 Turn o the printer.
2 Unplug the power cord from the electrical outlet.
3 Remove the indicated bins.
4 Reattach the bins.
5 Connect the power cord to a properly grounded electrical outlet.
6 Turn the printer back on.
• Remove the indicated bins:
1 Turn o the printer.
2 Unplug the power cord from the electrical outlet.
3 Remove the indicated bins.
4 Contact customer support at http://support.lexmark.com or your service representative.
From the printer control panel, touch Continue to clear the message and print without using the
indicated bins.
Troubleshooting 301