201
4
4-3. Operating the lights and wipers
Driving
4-3.Operating th e lights and wipers
Operating the switch turns on
the lights as follows:
1 The front position, tail, license
plate and instrument panel lights
turn on.
2 The headlights and all the
lights listed above turn on.
3 The headlights, daytime run-
ning lights (P.201) and all the
lights listed above turn on and off
automatically.
Q AUTO mode can be used when
The power switch is in ON mode.
Q Daytime running light system
To make your vehicle more visible to other
drivers during daytime driving, the daytime
running lights turn on automatically when-
ever the hybrid system is started and the
parking brake is released with the headlight
switch in the position. (Illuminate
brighter than the front position lights.) Day-
time running lights are not designed for use
at night.
Q Headlight control sensor
The sensor may not function properly if an
object is placed on the sensor, or anything
that blocks the sensor is affixed to the wind-
shield.
Doing so interferes with the sensor detect-
ing the level of ambient light and may cause
the automatic headlight system to malfunc-
tion.
Q Automatic light off system
O When the light switch is in the or
position: The headlights turn off after
the power switch is turned to ACCES-
SORY mode or off.
O When the light switch is in position:
The headlights and all lights turn off after
the power switch is turned to ACCES-
SORY mode or off.
To turn the lights on again, turn the power
switch to ON mode, or turn the light switch
to position once and then back to
Headlight switch
The headlights can be operated
manually or automatically.
Turning on the headlights
To Next Page
Loading...
