Lexus ES 2015 - Parking Support Brake Function (Rear-Crossing Vehicles)

298
4-5. Using the driving support systems
This function will operate in situations such as the following if a vehicle is detected
in the traveling direction of the vehicle.
Q When reversing, a vehicle is approaching and the brake pedal is not
depressed, or is depressed late
P.264
Q The Parking Support Brake function
(rear-crossing vehicles) will operate
when
The function will operate when the PKSB
OFF indicator is not illuminated or flashing
(P.93, 94) and all of the following condi-
tions are met:
O Hybrid system output restriction control
• The Parking Support Brake is enabled.
• The vehicle speed is approximately 15
km/h (9 mph) or less.
• Vehicles are approaching from the right
or left at the rear of the vehicle at a travel-
ing speed of approximately 8 km/h (5
Parking Support Brake function (rear-crossing vehicles)
If a rear radar sensor detects a vehicle approaching from the right or left at
the rear of the vehicle and the system determines that the possibility of a colli-
sion is high, this function will perform brake control to reduce the likelihood of
an impact with the approaching vehicle.
Examples of function operation
Types of sensors
WARNING
Q To ensure the system can operate
properly
P.264