260
4-5. Using the driving support systems
*
: If equipped
Q Meter display
Set speed
Indicators
Q Operation switches
“+RES” switch
Cruise control main switch
“-SET” switch
Cancel switch
1 Press the cruise control main
switch to activate the cruise con-
trol.
Cruise control indicator will come on.
Press the switch again to deactivate the
cruise control.
2 Accelerate or decelerate the vehi-
cle to the desired speed, and press
the “-SET” switch to set the speed.
Cruise control “SET” indicator will come
on.
The vehicle speed at the moment the
switch is released becomes the set speed.
To change the set speed, press the
“+RES” or “-SET” switch until the
desired set speed is obtained.
Cruise control
*
Use the cruise control to maintain a
set speed without depressing the
accelerator pedal.
System components
A
B
A
B
C
D
Setting the vehicle speed
Adjusting the set speed
To Next Page
Loading...
