210
4-3. Operating the lights and wipers
Q Temporarily switching to the low beams
It is recommended to switch to the low
beams when the high beam may cause
problems or distress to other drivers or
pedestrians nearby.
*
:If equipped
1 Turn the headlight switch to the
or position.
2 Turn the switch ring to the
position.
When the switch is released, it returns
to .
When the Multi Weather Lights sys-
tem is enabled, the Multi Weather
Lights indicator on the meter will illumi-
nate.
Turn the switch ring to the position
again to disable the system.
Q Operating conditions
The cornering lights will illuminate when the
Multi Weather Lights
*
The Multi Weather Lights is a sys-
tem that illuminates the cornering
lights to ensure visibility when driv-
ing in inclement weather, such as
rain or fog.
Enabling/disabling the Multi
Weather Lights
To Next Page
Loading...
