204
4-3. Operating the lights and wipers
vehicle is turning will be illuminated
more brightly than other areas.
Operates the shaded high beams so
that the area around vehicles ahead
is partially not illuminated while all
other areas continue to be illumi-
nated with the high beams.
The shaded high beams help optimize for-
ward visibility while reducing the dazzling
effect on the drivers of vehicles ahead.
Adjusts the distance that the low
beams are projected according to
the distance to a preceding vehicle.
When driving at low speeds, the
cornering lights will illuminate the
area around both front corners of
the vehicle.
1 Press the Adaptive High-beam
System switch.
2 Turn the headlight switch to the
or position.
The AHS indicator will come on when the
system is operating.
Q Conditions in which the light distribu-
tion control of the headlights changes
automatically
O When all of the following conditions are
met, the high beams will be turned on
automatically and the system will oper-
ate:
• The vehicle speed is approximately
15km/h (10 mph) or more.
*
• The area ahead of the vehicle is dark.
*
: When the vehicle speed is approximately
30 km/h (19 mph) or more, the area in
the direction that the vehicle is turning
will be illuminated more brightly than
Activating the Adaptive High-
beam System
To Next Page
Loading...
