340
5-5. Using the storage features
Deepen
Rear
To open, pull down the armrest and
press in and release the rear cup
holder on the armrest.
Q Front cup holder (type A)
O After closing the USB terminal lid, close
the cup holder lid.
O When cleaning the cup holder, the parti-
tion and another parts can be removed
according to the following procedure.
1 Remove the partition
2 Remove the plate
Q When stowing the rear cup holders
Stow the cup holder with the armrest down.
The cup holder cannot be stowed if the
armrest is not down.
Front
Press in the button.
Rear
Pull the armrest down then press the
knob to open the lid.
B
Q Items unsuitable for the cup holder
Do not place anything other than a cup,
beverage can or bottle (front [type B]) in
the cup holder. Even when the lid is
closed, items must not be stored in the
cup holder.
Other items may be thrown out of the
holder in the event of an accident or sud-
den braking, causing injury. If possible,
cover hot drinks to prevent burns.
Q To prevent damage to the cup holder
O Depending on the size of the cup, bev-
erage can or bottle, do not use the cup
holder in the shallow condition. When
taking out the cup, beverage can or
bottle or in the event of sudden brak-
ing, they may be thrown out of the
holder or the contents may spill.
O Stow the rear cup holder before stow-
ing the armrest.
Auxiliary boxes
To Next Page
Loading...
