395
6
6-3. Do-it-yourself maintenance
Maintenance and care
5 Remove the light bulb.
6 Install a new light bulb then install
the bulb base to the light unit by
inserting it and turning the bulb
base clockwise.
7 Return the fender liner to its origi-
nal position, and install the clip.
Make sure that the fender liner is correctly
positioned on the inner side of the front
bumper.
8 Engage the clips to the front
bumper to install the fender liner,
and then remove the protective
tape.
Q Replacing light bulb
O Turn off the light. Do not attempt to
replace the bulb immediately after
turning off the light.
The bulb become very hot and may
cause burns.
To Next Page
Loading...
