425
7
7-2. Steps to take in an emergency
When trouble arises
1 Take out the repair kit from the
plastic bag.
Attach the sticker enclosed with the bottle
on the specified locations. (See step 10.)
2 Remove the hose and take out the
power plug from the compressor.
3 Connect the bottle to the compres-
sor.
Insert and connect the bottle straight into
the compressor as shown in the illustration,
and check that the claws of the bottle are
concealed in the holes.
4 Connect the hose to the bottle.
As shown in the illustration, make sure the
hose is connected securely to the bottle.
Emergency repair procedure
To Next Page
