Lexus ES 2015 - Page 91

89
1
1-5. Theft deterrent system
For safety and security
will respond to movement inside the
vehicle.
1 Turn the power switch off.
2 Press the intrusion sensor and tilt
sensor cancel switch.
Press the switch again to re-enable the
intrusion sensor and tilt sensor.
Each time the intrusion sensor and tilt sen-
sor are canceled/set, a message will be
shown on the multi-information display in
the instrument cluster.
Q Canceling and automatic re-enabling of
the intrusion sensor and tilt sensor
O The alarm will still be set even when the
intrusion sensor and tilt sensor are can-
celed.
O After the intrusion sensor and tilt sensor
are canceled, pressing the power switch
or unlocking the doors using the entry
function or wireless remote control will
re-enable the intrusion sensor and tilt
sensor.
O The intrusion sensor and tilt sensor will
automatically be re-enabled when the
alarm system is deactivated.
Q Intrusion sensor detection consider-
ations
The sensor may trigger the alarm in the fol-
lowing situations:
O People or pets are in the vehicle.
O A window or moon roof is open.
In this case, the sensor may detect the fol-
lowing:
• Wind or the movement of objects such as
leaves and insects inside the vehicle
• Ultrasonic waves emitted from devices
such as the intrusion sensors of other
vehicles
• The movement of people outside the
vehicle
O Unstable items, such as dangling acces-
sories or clothes hanging on the coat
hooks, are in the vehicle.
O The vehicle is parked in a place where
extreme vibrations or noises occur, such
as in a parking garage.