OCCUPANT RESTRAINT SYSTEM
164
Canada only
Type B
For owners in Canada
The symbol on a child restraint system indicates the presence
of a lower connector system.
CHILD RESTRAINT SYSTEM INSTALLATION
Type A —
1. Widen the gap between the seat cushion and seatback
slightly and confirm the position of the lower anchorages
near the button on the seatback.
2. Latch the hooks of lower straps onto the anchorages
and tighten the lower straps.
Type B —
1. Widen the gap between the seat cushion and seatback
slightly and confirm the position of the lower anchorages
near the button on the seatback.
2. Latch the buckles onto the anchorages.
If your child restraint system has a top strap, it should be
anchored. (For the installation of the top strap, see “Using a top
strap” on page 161.)
For installation details, refer to the instruction manual equipped
with each product.
To Next Page
