To adjust the position of the accelerator and brake pedals:
1. Set the parking brake firmly.
2. Turn the ignition key to the “ON” position with the
automatic transmission selector lever in the “P” position.
3. Push the “Ɯ” side of the switch to move the pedals to the
front most position.
4. Push the “Ɲ” side of the switch to move the pedals
toward you until you can fully depress the brake pedal.
5. After adjusting, depress the pedals a few times to get
used to the feel.
BE070 (center/4)
QUICK REFERENCE
3
3. POWER ADJUSTABLE PEDALS
To Next Page
