Connecting with a Bluetooth
®
de
vice
Connection with a Bluetooth
®
device is required to use various function of the
multimedia system. There are two connection methods, automatic and manual.
INFORMATION
● R
efer to the Bluetooth
®
device's instruction manual for information on how to operate
the Bluetooth
®
device.
● If behavior is unstable when connecting a cellular phone, disconnect the call and try
connecting again.
● A connection cannot be made if Bluetooth
®
on the Bluetooth
®
device is not turned
on.
● When connection of the Bluetooth
®
device is completed, a message indicating so will
be displayed at the top of the screen.
● While the Bluetooth
®
device is connected, the Bluetooth
®
connection status icon is
displayed.
● The display area may illuminate and stay on while the engine switch <power switch> is
turned on, depending on the model of cellular phone. If this occurs, turn illumination
off on the cellular phone. (For information on setting, refer to the cellular phone
instruction manual)
● The Bluetooth
®
function cannot be used on the device connected as Apple CarPlay.
● The Bluetooth
®
function except the hands-free function cannot be used on the device
connected as Android Auto.
■ Bluetooth
®
r
econnection
If a Bluetooth
®
connection that was once established is disconnected while the
engine switch <power switch> is turned on, a reconnection will be automatically
attempted.
■ Number of Bluetooth
®
device connections
● When the driver is identified
Up to two hands-free phones and one audio device will be connected automat-
ically. (The hands-free phone and audio device can also be set as the same
device.)
● When the driver is not identified
Up to one hands-free phone and one audio device will be connected automat-
ically. (The hands-free phone and audio device can also be set as the same
device.)
3-1. Using the Bluetooth
®
function
98
To Next Page
Loading...
