Using the Adaptive High-beam System
1 Press the Adaptive High-beam System
switch.
2 Turn the headlight switch to the [AUTO] or
[
] position.
When the headlight switch lever is in the low
beam position, the AHS system will be enabled
and the AHS indicator will illuminate.
INFORMATION
■ System operating conditions
● When all of the following conditions are met, the high beams will illuminate and the
system will operate:
• The vehicle speed is approximately 19 mph (30 km/h) or more
• The area ahead of the vehicle is dark.
● When all of the following conditions are met, the headlights will change to the shaded
high beams according to the position of vehicles ahead:
• The vehicle speed is approximately 19 mph (30 km/h) or more
•
The area ahead of the vehicle is dark.
•
There is a vehicle ahead with lights on.
•
There are few streetlights or other lights on the road ahead.
● If any of the following conditions are met, the system will change to the low beams:
•
The vehicle speed is approximately 16 mph (25 km/h) or lower.
•
The area ahead of the vehicle is not dark.
•
There are many vehicles ahead.
•
There are many streetlights or other lights on the road ahead.
3-1. Driving when the surrounding area is dark
202
To Next Page
Loading...
