Driving position registration/recall/deletion
*
This feature automatically adjusts the positions of the driver’s seat, steering wheel,
outside rear view mirrors and head-up display
*
to make entering and exiting the
vehicle easier or to suit your preferences.
Vehicle with the My Settings:
Up to 3 different driving positions can be recorded for each the driver and guest
that have been registered for My Settings. When electronic key (including a card
key) assignment is registered for My Settings, the driving position for each driver
can be recalled (memory recall function).
Vehicle without the My Settings:
Up to 3 different driving positions can be recorded.
INFORMATION
■ Using the voice control system
*
The following operations can be performed using the voice control system:
● Driving position registration
● Driving position recall (only when the shift position is in P)
For details, refer to the .
Registering a driving position into memory (position memory function)
1 Check that the shift position is in P.
2 Turn the engine switch to ON.
3 Adjust the driver’s seat, steering wheel, outside rear view mirrors and head-up
display
*
to the desired positions.
4 While pressing the “SET” button, or within
3 seconds after the “SET” button is pressed,
press button “1”, “2” or “3” until the buzzer
sounds.
If a driving position has already been registered
to the selected button, the previously registered
position will be overwritten.
* :
If equipped
4-2. Adjusting the preferred driving position
251
4
Interior features
To Next Page
Loading...
