What to do if a problem occurs while driving
What to do if a problem occurs while driving
Using the emergency flashers to warn other drivers
Use the emergency flashers to inform other drivers of the presence of your vehicle
when it is stopped on the road, such as if the vehicle has broke down.
Press the switch.
All the turn signal lights will flash. To turn them off,
press the switch once again.
INFORMATION
■ Emergency flashers
● If the emergency flashers are used for a long time with the engine stopped, the battery
may become discharged.
● If any of the SRS airbags deploy (inflate) or in the event of a strong rear impact, the
emergency flashers will turn on automatically.
The emergency flashers will turn off automatically after operating for approximately
20 minutes. To manually turn the emergency flashers off, press the switch twice. (The
emergency flashers may not turn on automatically depending on the force of the
impact and conditions of the collision.)
Stopping the vehicle in an emergency
Stop the vehicle using the following procedure only in an emergency, such as if it
becomes impossible to stop the vehicle in the normal way:
WARNING
■ If the engine has to be stopped while driving
Power assist for the brakes and steering wheel will be lost, making the brake pedal harder
to depress and the steering wheel heavier to turn. Decelerate as much as possible before
stopping the engine.
1
Steadily step on the brake pedal with both feet and firmly depress it.
Do not pump the brake pedal repeatedly as this will increase the effort required to slow
the vehicle.
9-1. What to do if a problem occurs while driving
555
9
When trouble arises