Changing settings for the head-up display
WARNING
● Check that the position and brightness of the head-up display image does not inter-
fere with safe driving.
Incorrect adjustment of the image’s position or brightness may obstruct the driver’s
view and lead to an accident, resulting in death or serious injury.
● As the engine needs to be running while changing the settings of the head-up display,
ensure that the vehicle is parked in a place with adequate ventilation. In a closed area
such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect
and enter the vehicle. This may lead to death or a serious health hazard.
NOTICE
To prevent battery discharge, ensure that the engine is running while the changing the
settings of the head-up display.
INFORMATION
■ Changing settings with the steering wheel switches
If any of the following items have been set as as a favorite steering wheel switch function,
settings of the head-up display can be changed using the steering wheel switches.
● : Display on/off
●
: Display mode
●
/ : Height
●
/ : Brightness
■ Enabling/disabling of the head-up display
If the head-up display is disabled, it will remain disabled when the engine switch is turned
off then back to ON.
■ Display brightness
In addition to the brightness setting, the brightness of the display will change automatical-
ly according to the ambient brightness.
■ Head-up display automatic position adjustment (vehicles with driving position
memory)
If the display position is recorded into memory, the head-up display will be automatically
adjusted to the desired position.
5-3. Changing the settings of the displays
342
To Next Page
Loading...
