INFORMATION
■ FCTA system operating conditions
The system will operate when all of the following conditions are met:
● A shift position other than P or R is selected
● The vehicle speed is approximately 10 mph (15 km/h) or less
● A vehicle is approaching from the left or right in front of your vehicle at a speed
between approximately 7 to 37 mph (10 to 60 km/h)
● There are no vehicles in front of your vehicle
● The accelerator pedal is not being strongly depressed
● The brake pedal is not being strongly depressed
■ Situations in which the system may operate even though no vehicles are approach-
ing
In certain situations, such as the following, the system may operate even though no
vehicles are approaching:
● When approaching objects on the roadside, such as guardrails, traffic signs, utility
poles, street lights, trees, tall grass, walls, etc.
● When passing an object on the side of the road, such as a parked vehicle
● When a vehicle or pedestrian is approaching from the left or right in front of your
vehicle in the distance
● When a vehicle or pedestrian is moving within a parking spot, etc., next to the lane
your vehicle is in
● When a pedestrian or bicyclist is approaching on a sidewalk
● When a vehicle or pedestrian is moving away from your vehicle
● When an approaching vehicle is decelerating or stops
● When an approaching vehicle makes a left/right turn immediately in front of your
vehicle
● When a pedestrian is approaching your vehicle
● When an oncoming vehicle makes a right/left turn
● When your vehicle enters an intersection before a vehicle approaching from the left or
right in front of your vehicle
● When stopped at traffic light and a vehicle approaches from the left or right in front of
your vehicle
6-2. Using the safe driving support functions
392
To Next Page
Loading...
