20
RZ450e_RZ300e_QG_U
P position switch
Fully stop the vehicle and set the park-
ing brake, and then press the P position
switch.
When the shift position is changed to P,
the switch illuminates.
Check that the shift position indicator
shows P.
Shift position indicator
• Meter display:
The current shift position is illuminated.
• Rotary shifter display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by
checking the shift position indicator
provided on the instrument cluster.
Rotary shifter
Operate the dial shift gently and
securely.
To switch to N, hold down the dial shift
and hold it for a while.
To switch to R or D, hold down the dial
shift and turn left or right according to
the arrow on the shift position indicator.
Release the rotary shifter after each
shifting operation to allow it to return to
its regular position.
When shifting from P to N, D or R,
from N, D or R to P, from D to R, or
from R to D, ensure that the brake
pedal is being depressed and the vehi-
cle is stationary.
Changing the shift position
Shift position display and how to change the shift position
B
C
To Next Page
Loading...
