75
RZ450e_RZ300e_QG_U
The back door can be locked/unlocked and opened/closed by the following procedures.
The back door can be locked/unlocked while carrying an electronic key or the card key.The
driver should always carry the electronic key or the card key.
■
Lock/unlock the back door using smart access system with push-button start
Perform the following while carrying an
electronic key.
1
Press
1
.
All of the doors will unlock. However,
the doors cannot be unlocked within 3
seconds after they were locked.
2
Press
2
.
All of the doors will lock. Make sure
that the doors are securely locked.
■
Opening/closing the back door from the inside
Press the for 1 second.
A buzzer sounds and the back door auto-
matically opens and closes.
Pressing the while the back door
is opening/closing stops the operation.
When the is pressed again during
the halted operation, the back door will per-
form the reverse operation.
Back door functions and operation
Operating the back door using the smart access system with push-but-
ton start
Back door operations using the back door operation switch inside the
vehicle (vehicles with the power back door)