88
What to do if...
RZ450e_RZ300e_QG_U
To take out the mechanical key, push the
release button and take the key out.
The mechanical key can only be inserted in
one direction, as the key only has a groove
on one side. If the key cannot be inserted in
a lock cylinder, turn it over and attempt to
insert it again.
After using the mechanical key, return it to
its original position and carry it with the
electronic key. If the electronic key battery
is depleted, the entry function is not operat-
ing properly, or the vehicle 12-volt battery is
discharged, you will need the mechanical
key.
1
Insert a plastic card, etc. into the gap in
the door handle to pry up the cover.
To avoid damage, do not apply exces-
sive force to the cover.
When the doors/windows cannot be operated using
an electronic key
Using the mechanical key
Locking and unlocking the doors
To Next Page
Loading...
