74
RZ450e_RZ300e_QG_U
1
Unlock the doors and open the
charging port lid.
The charging inlet light will illuminate.
2
Open the DC charging inlet cap.
3
Insert DC charging connector firmly
and fully into the charging inlet
Insert the DC charging connector and
it will lock automatically.
The DC charging connector shape
and treatment will differ depending on
the type of DC charger. Perform the
operations in accordance to handling
procedures of the DC charger.
4
Operate the DC charger and start the
charging.
Follow the handling procedures of the
DC charger to start charging.
Charging starts after a system check is
done.
Stop the charging in accordance to the
handling procedures of the DC char-
ger when it is desired to interrupt the
DC charging.
How to use DC charging
When charging
To Next Page
Loading...
