These Operating Instructions are the original instructions.
3.5 Oil Temperature Sensor Pt 100 43
3.6 Connecting the SP-Guard 45
3.7 Retrofitting the Manual Gas Ballast with a 24 V DC Valve 48
3.7.1 Connecting the Electro-pneumatic Gas Ballast Valve 49
3.8 Connecting the Purge Gas Valve 50
4 Operation 51
4.1 Start-up 51
4.1.1 Oil Filling for the Gear 51
4.1.2 Switching the Pump On 53
4.2 Operation 54
4.2.1 Operation with SP-Guard 54
4.2.2 Gas Ballast Operation 55
4.2.3 Purge Gas Operation 56
4.2.4 Regular Checks 57
4.3 Switching Off/Shutting Down 58
5 Maintenance 59
5.1 Checking the Oil Level 60
5.1.1 Oil Change and Oil Filter Change 60
5.2 Cleaning the Oil Cooler 62
5.3 Draining Out Condensate 63
5.4 Cleaning the Dust Filter in the Intake Line 63
5.5 Checking and Cleaning the Gas Ballast Filter 64
5.6 Replacing the Throttle in the Purge Gas Device 64
5.7 Service at Leybold 66
5.8 Maintenance Schedule 67
6 Troubleshooting 68
7 Waste Disposal 71
EC Declaration of Conformity 72
To Next Page
Loading...
