EasyManua.ls Logo

LF-B CT26-15 - SETTINGS; INSTALLATION; Saddle settings

Default Icon
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Manual CT26-15 - LFB
7
By pedaling backwards you should not wiggle.
To calculate the height, you can also the formula «saddle height» = 0.885 x «crotch». To measure the
crotch height put yourself barefoot and spaced beads ve centimeters. Place (without pressing too hard) a
stick against your perineum and then measure the height from the oor to the stick. You then get the value
«crotch».
Fasten the quick release.
r
the saddle tube should not coMe out beyond the etched saFety Mark (vertical bars).
Safety Mark.
The minimum height between the highest point of the saddle and the soil is 80 cm.
2.2 Handlebar adjustement (handlebars and stem)
Allen key 6 mm.
2.2.1 Height
To be comfortable, the position of your handlebars should be at least at the same height as your saddle, or
more depending on your comfort. Unscrew the Allen screw and set the desired height of your handlebars.
Screw height adjustment. Handlebar angle adjustment screws.
Do the same with the second screw to adjust the angle of your handlebars. After adjustment, vigorously
tighten screws, maximum tightening torque of 25 Nm.