7
5 ATOMIC CLOCK RECEPTION
8). Put the weather station away from interference, such as electronic devices
(TV, computer, microwave, radio, etc.)
9). When the atomic clock signal is received successfully , the time and date
will be updated.
10). Allow the outdoor sensor and weather to sit together for 15 minutes to
establish a strong connection.
11). Do not press button for 15 minutes.
12). After 15 minutes, place the sensor in a shaded outdoor location.
Manual RCC Reception
• The weather station automatically begins search WWVB signal and update
the time every day at 1:00am，2:00am，3:00am，4:00am，5:00am.
• The Atomic Time tower icon will flash while searching and will be solid
when it has connected.
You can receive the atomic clock signal manually. In Normal display, press and
hold the Down /RCC over 3 sec to receive the atomic clock signal manually.
The tower icon is flashing and will start atomic clock reception.
When the atomic clock signal is received successfully, the time and date
will be updated.
To Next Page
Loading...
