Displayed functions can be selected by pressing one of the 3 soft buttons. For instance, if
you want to select Call Pickup (as shown below), press the first button on the left. If there
are more than three functions available at any point, an arrow will be displayed on the LCD
display. Use the navigation key to move the to next or previous screen to show additional
functions.
Basic Function
3 Soft Buttons are located below the LCD display.
1. Idle
PICKUP: press to answer a call ringing within the same pickup
group.
CONF: press to initiate & activate a conference.
REDIAL: press to redial the last number called.
STATION 100 (T)
FEB 01 04 05:34 pm
PICKUP CONF REDIAL
Astationcanpickupacallringingtoanunattendedstationwithinthesamepickupgroup
using the pickup procedure (refer to the System Programming manual).
To Next Page
Loading...
Need help?
General
