9. Intercom Talk
CALL FROM STA 104
FEB 01 04 05:34 pm
TRANS CONF MUTE
TRANS: Press to transfer an incoming call to another station.
CONF: Press to initiate a conference call.
MUTE: Press to mute the handset, speakerphone, or headset
Press the programmed flexible button for CO Line (CO Line also
can be accessed by dialing the CO access code 9, or 88XX (XX:
The CO access code (ex., 9, 88XX) can be changed by System Administrator.
10.1 MANUAL DIALING
TRANS CONF MUTE →
CO line number, 01-12).
Dial the desired telephone number.
SPD_NO LAST(*) SAVE(#)
DIAL_BY_NAME([SPEED])
SPEED
Press the [SPEED] button.
Dial the desired speed bin number (Station speed bin:000-099,
System speed bin :2000-2499).
10.2 SPEED DIALING
SPD_NO LAST(*) SAVE(#)
DIAL_BY_NAME([SPEED])
SPEED
Press SPEED to search speed dial by name.
1. DIAL BY ICM NAME
2. DIAL BY STA SPD NAME
OK
Press OK to enter DIAL BY STA / SYS SPD NAME (refer to
Phone Book).
11. CO Line Busy
CO LINE 001 BUSY
QUEUING ([CALLBK])
CALLBK
CALLBK: When attempting to place a call and no lines are
available, a busy tone will be returned; press the [CALLBK]
button to reserve a CO line.
11