52
Part Disassembly and Replacement
Part Disassembly and Replacement
7
LGE Internal Use Only
Copyright © 2018 - 2020 LG Electronics Inc. All rights reserved.
Only training and service purposes.
Part Disassembly and Replacement
• Before disassembling parts, turn off the PC power and separate the AC adapter from the PC and remove all the
connected cables.
• Before turning on the PC again after replacing the part, check if screws, springs and other small parts are in the correct
positions on the PC. Shake the PC and see if it makes noises.
• Metallic parts or pieces can cause a short circuit to damage the system.
CAUTION
• Torque of 2.0 ± 0.2kgf • Cm applies when screwing on each part.
• For further information on Removing and Replacing a Part(FRU), refer to Explore view.
NOTE
To Next Page
Loading...
