29
ENGLISH
[Input]
1 Press the button on the front of the monitor, then select [All Settings] to display the complete OSD menu.
2 Press , , or button on the front to select [Input].
3 Configure the options following the instructions that appear in the bottom right corner.
4 If you want to configure an upper menu or another option, move using the button among the front adjust buttons or by pressing
/ .
5 To leave the OSD menu, press the or button.
Input
Quick Settings
Input
Picture
Input List DisplayPort >
Aspect Ratio Full Wide >
General
Auto
Configuration
: Exit / : Move
/ : Ok
To Next Page
Loading...
