39
ENGLISH
[Auto Configuration]
1 Press the button on the front of the monitor, then select [All Settings] to display the complete OSD menu.
2 Press , , or button on the front to select [Auto Configuration].
3 Configure the options following the instructions that appear in the bottom right corner.
4 If you want to configure an upper menu or another option, move using the button among the front adjust buttons or by pressing
/ .
5 To leave the OSD menu, press the or button.
Auto Configuration
Quick Settings
Do you want to Auto Configuration?
No
Input
Yes
Picture
General
Auto
Configuration
: Exit / : Move
/ : Ok
The applicable setting options are as shown below.
[All Settings] > [Auto Configuration] Explanation
[Do you want to Auto Configuration?] [No] Cancel the auto configuration.
[Yes] Automatically sets screen to optimal settings.
To Next Page
Loading...
