3
4
NOTE
• Press the stand until the button rises to maximum height.
CAUTION
• Illustrations in this document represent typical procedures, so they may look different from the actual
product.
• Do not use foreign substances (oil, lubricants) when assembling the product. (This may damage the
product.)
• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in
this way will not be covered by the product warranty.
• Do not carry the monitor upside down by just holding the stand base. This may cause the monitor to
fall off the stand and could result in personal injury.
• When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor
screen may cause damage to it.
NOTE
• The stand can be disassembled by following the assembly steps in the opposite order.
To Next Page
Loading...
