Auto Configuration
1 Press the button on the front of the monitor, then select All Settings to display the complete OSD menu.
2 Press , , or button on the front to select Auto Configuration.
3 Configure the options following the instructions that appear in the bottom right corner.
4 If you want to configure an upper menu or another option, move using the button among the front adjust buttons or by pressing
[ / ].
5 To leave the OSD menu, press the or button.
Auto Configuration
Quick Settings
Do you want to Auto Configuration?
No
Input
Yes
Picture
General
Auto
Configuration
: Exit / : Move
/ : Ok
The applicable setting options are as shown below.
All Settings > Auto Configuration Explanation
Do you want to Auto Configuration? No Cancel the auto configuration.
Yes Automatically sets screen to optimal settings.
To Next Page
Loading...
