42
PBP
1 To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
2 Go to PBP by moving the joystick.
3 Configure the options following the instructions that
appear in the bottom right corner.
4 To return to the upper menu or set other menu items,
move the joystick to or pressing ( /Ok) it.
5 If you want to exit the OSD menu, move the joystick to
until you exit .
PBP
Quick
Settings
Sub Off >
Sound Out Main >
PBP
Swap
Sub Full
Picture
Ratio >
General
Reset
PBP Preview
HDMI1
/ : Move
/ : Ok
: Back
Each option is described below.
Menu > PBP Description
Sub Displays the screens of two input modes on one monitor.
PBP Connection
Sub Screen (Right)
HDMI 1 HDMI 2 DisplayPort
Main Screen
(Left)
HDMI 1 X X O
HDMI 2 X X O
DisplayPort O O X
Sound Out Changes the audio output in PBP mode.
Main Selects the input for Main.
Sub Selects the input for Sub.
Swap Toggles between the main screen and sub screen in PBP mode.
Sub Full Converts the sub screen in PBP mode to wide screen.
To Next Page
Loading...
Need help?
General
