9
ASSEMBLING AND PREPARING
y
Do not put your fingers or
hand between the screen
and the base (chassis) when
adjusting the screen's height.
WARNING
Adjusting the Angle
1
Place the monitor mounted on the stand base
in an upright position.
2
Adjust the angle of the screen. The angle of
the screen can be adjusted forward or back-
ward from -5° to 35° for a comfortable
viewing experience.
-535
FrontRear
3
You can adjust the angle of the screen by 45
degrees to the left or to the right.
45
˚
45
˚
y
To avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
WARNING
y
When adjusting the angle horizontally, make
sure there are no objects near the moni-
tor. Also, make sure there is enough room
between the monitor and the wall. Install the
product on a flat surface to swivel smoothly.
CAUTION