What to do if the screen display is unstable and shaky on my LG 27UD59-B.AUS?
If the screen display is unstable and shaky, or if images displayed on the LG monitor leave shadow trails, and the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080P or the recommended resolution.
What to do if there is no sound from the headphone port or speaker of my LG Monitor?
If there is no sound from the headphone port or speaker of your LG Monitor, first, try increasing the volume using the button on the monitor. If that doesn't work, set the audio output of the PC to the monitor you are using. On Microsoft Windows, go to Control Panel > Hardware and Sound > Sound and set the monitor as the default device.
What to do if nothing is displayed on my LG 27UD59-B.AUS Monitor screen?
If nothing is displayed on your LG Monitor screen, try these steps: First, check that the power cord is correctly plugged into the power outlet. Then, verify the power cable connection and press the power button. Ensure that the connected input is enabled by going to Menu > Quick Settings > Input. If the monitor is in sleep mode, move the mouse or press any key on the keyboard. Also, confirm that your computer is turned on. Finally, check the cable and reconnect it.
How to troubleshoot no sound from LG 27UD59-B.AUS headphone port?
If there is no sound from the headphone port or speaker of your LG Monitor, try increasing the volume using the button on the monitor. Also, set the audio output of the PC to the monitor you are using by going to Control Panel > Hardware and Sound > Sound and setting the monitor as the default device on Microsoft Windows.
How to fix an LG Monitor when nothing is displayed on the screen?
If nothing is displayed on your LG Monitor screen, start by checking if the power cord is properly connected to the power outlet and test the outlet with a lamp. Also, verify the power cable connection and press the power button. Ensure the correct input is enabled by going to Menu > Quick Settings > Input. If the monitor is in sleep mode, move the mouse or press a key. Confirm that your computer is turned on. Check the cable and reconnect it. If the signals from the PC are out of range, see the Product Specification section of this manual to set the appropriate frequency.
What to do if my LG Monitor is unrecognized?
If you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message with your LG monitor, be sure to install the display driver from the LG website: http://www.lg.com. Also, ensure that your video card supports the Plug&Play function.
Why is my LG Monitor screen shaky and unstable?
If your LG monitor screen display is unstable and shaky, or if images leave shadow trails, and the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080P or the recommended resolution.
How to fix no sound from LG Monitor headphone port?
If there is no sound from the headphone port or speaker of your LG monitor, you can try the following: - Increase the volume using the button on the monitor. - Set the audio output of the PC to the monitor you are using. On Microsoft Windows, go to Control Panel > Hardware and Sound > Sound and set the monitor as the default device.
To Next Page
General
