LG 27UD68 - Picture-by-Picture (PBP) Mode; PBP Mode Configuration Notes

18
ENG
ENGLISH
User Settings
Eachoptionisdescribedbelow.
-PBP
1
ToviewtheOSD menu,pressthejoystick buttonat
thebottomofthemonitorandthenentertheMenu.
2
GotoPBPbymovingthejoystick.
3
Configuretheoptionsfollowingtheinstructionsthat
appearinthebottomrightcorner.
4
Toreturntotheuppermenuorsetothermenuitems,
movethejoystickto◄orpressing( /OK)it.
5
IfyouwanttoexittheOSDmenu,movethejoystick
to◄untilyouexit.
Menu > PBP Description
Sub
Displaysthescreensoftwoinputmodesononemonitor.
PBP Connection Sub Screen (Right)
HDMI 1 HDMI 2 DisplayPort
Main Screen
(Left)
HDMI 1 - - O
HDMI 2 - - O
DisplayPort O O -
Sound Out
ChangestheaudiooutputinPBPmode.
Swap
TogglesbetweenthemainscreenandsubscreeninPBPmode.
Sub Full
ConvertsthesubscreenofPBPmodetothewidescreen.
Ratio
Adjuststheaspectratioofthemainscreenorsubscreen.
Main Wide
DisplaysthevideotofitthePBPscreen,regardlessofthevideosignalinput.
Original
DisplaysthevideointheaspectratioofthevideosignalinputonthePBPscreen.
Sub Wide
DisplaysthevideotofitthePBPscreen,regardlessofthevideosignalinput.
Original
DisplaysthevideointheaspectratioofthevideosignalinputonthePBPscreen.
NOTE


WhentheSubmodeisOff,SoundOut,Swap,SubFull,andRatiomenusbecomedisabled.
TheMain/SuboptionsforRatiobecomedisabledifthereisnosignal.


TheoptimalresolutionforPBPmodeissetautomaticallywhenPBPmodeisset.