LG 32LC7D Series - WATCHING TV;PROGRAMME CONTROL; PROGRAMME SELECTION; VOLUME ADJUSTMENT

WATCHING TV/PROGRAMME CONTROL
('7
-r"
z
<
--@
©
>
fT1
N
©
Z
©
TURNING ON THE TV
If your TV will be turned on, you will be able to use its features.
@
Ensure the power cord is connected correctly.
When connected to power the TV switches to standby mode.
In standby mode, press the (5/I, INPUT, PR (A or 11')
button on the TV or press the POWER, INPUT, D/A
INPUT, PR (+or-), Number (0~9) button on the
remote control.
Select the viewing source by using the INPUT button on
the remote control.
This TV is programmed to remember which mode it was
last set to, even if you turn the TV off.
When finished using the TV, press the POWER button on
the remote control. The TV reverts to standby mode.
INITIALIZING SETUP
@
If the OSD (On Screen Display) is displayed on the screen
as figure 1 after turning on the set, you can adjust the Auto
Programme tuning, Time Zone selection or Password set-
ting.
3O
Figure 1.