1/11
STEREO/DUAL RECEPTION - InAnalogue Mode only
• Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to
mono by pressing the 1/11 button twice. In mono reception, the
clarity of sound is improved. To switch back to stereo, press the
I/ll button twice again.
MONO
_tere MONO / STEREO
SPEAKERSOUND OUTPUT SELECTION
In AV 1-2, Component 1 -2, RGB-PC, HDMI1/DVI or HDMI 2
mode, you can select output sound for the left and right loud-
speakers.
Repeatedly press the 1/11 button to select the sound output.
L+R: Audio signal from audio L input is sent to the left loud
speaker and audio signal from audio R input is sent to the right
loud speaker.
L+L: Audio signal from audio L input is sent to left and right loud
speakers.
R+R: Audio signal from audio R input is sent to left and right loud
speakers.
0
c
Z
z
c
l'rl
N
0
Z
.-I
0
67
To Next Page
Loading...
