PROGRAMMEEDIT
This function enables you to delete or skip the stored pro-
grammes. Also you can move some stations to other pro-
gramme numbers or copy blank station data into the
selected programme number.
Press the MENU button and then use • or • button
to select the SETUP menu.
Pressthe I_ button and then use • or • button to
select Programme edit..
Press the I_ button.
@
Deleting a programme (In Analogue Mode Only)
a. Select a programme to be deleted with the • or •
or • or I_ buttons.
b. Press the RED button twice. The selected pro-
gramme is deleted, all the following programmes
are shifted up one position.
Copying a programme (In Analogue Mode Only)
a. Select a programme to be copied with the • or •
or • or I_ buttons.
b. Press the GREEN button.
c. Move the programme to the desired programme
number with the • or • or • or I_ buttons.
d. Press the GREEN button again to copy the pro-
gramme. All the following programmes are shifted
down one position.
@
@
@@@
-r"
z
<
--@
©
>
r_l
N
©
Z
©
41
To Next Page
Loading...
