LG Electronics Inc. Display Division
Establish :
Reform :
LC01U Adjust specification
LG(56)C2-0789-00
EZ ADJUST
0. Tool Option1
1. Tool Option2
2. Tool Option3
3. Tool Option4
4. Tool Option5
5. Country Group
6. ADC Calibration
7. White Balance
8. 10 Point WB
9. Test Pattern ▶
10. EDID D/L
11. Sub B/C
12. V-Com
13. P-Gamma
4.5 EDID DATA
1) All Data : HEXA Value
2) Changeable Data :
*: Serial No : Controlled / Data:01
**: Month : Controlled / Data:00
***:Year : Controlled
****:Check sum
- Auto Download
■ Enter ‘EZ ADJUST’ mode by pushing ‘ADJ’ key.
■ Select and enter ’10.EDID D/L’ mode.
■ Select ‘START’ by pushing ‘OK’ key.
Caution : Never connect HDMI &
D-sub Cable when auto download.
LG electronics
EDID D/L
HDMI1 NG
HDMI2 NG
HDMI3 NG
RGB NG
Start Reset
EDID D/L
HDMI1 OK
HDMI2 OK
HDMI3 OK
RGB OK
Start Reset
.
※
EDID data and Model option download (RS232)
NO Item CMD 1 CMD 2 Data 0
Enter
download MODE
Download
‘Mode In’
A A 0 0
When transfer the ‘Mode In’,
Carry the command.
EDID data and
Model option
Download
Download
A E 00 10
Automatically download
(The use of a internal Data)
- Manual Download
* Use the proper signal cable for EDID Download
- Analog EDID : Pin3 exists
- Digital EDID : Pin3 exists