LG Electronics Inc. Display Division
Establish :
Reform :
LC01U Adjust specification
LG(56)C2-0789-00
4.7 Outgoing condition Configuration
Push ‘IN STOP’ key, then in-stop processing will start.
If processing is complete, TV will turn off automatically.
※ Must not AC power OFF during processing.
4.8 Internal pressure
Confirm whether is normal or not when between power board's ac block and GND is impacted on 1.5kV(dc) or 2.2kV
(dc) for one second.
4.9. 3D Function test(Only 42/47/55LW4500)
(Pattern Generator MSHG-600 or MSPG-6100 HDMI 1.4 Supported Equipment
, HDMI mode No. 872 , pattern No. 83)
1) Input 3D test pattern.
(HDMI mode No. 872, Pattern No. 83)
2) After automatically display 3D OSD, push the OK Key.
3) Check the pattern such as in the following Fig2 without having to wear glasses.
LG electronics
To Next Page
Loading...
