Adding an Input label
Add a label to an input source so that you can
easily identify a device connected to each input
source.
1 Press INPUT to access the input sources.
2 Press Green button.
3 Press the Navigation buttons to scroll to one of
the input sources.
4 Press the Navigation buttons to scroll to one of
the input labels.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Image shown may differ from your TV.
Using the quick menu
Customize the frequently using menus.
1
Press Q. MENU to access the quick menus.
2
Press Navigation buttons to scroll through the
following menus and press OK.
Menu Description
Aspect Ratio Changes the image size (16:9,
Just Scan, Original, Full Wide,
4:3, 14:9, Cinema Zoom)
Picture Mode Changes the image mode
(Intelligent Sensor, Vivid,
Standard, Cinema, Game,
Expert1, Expert2)
Sound Mode Changes the sound mode
(Standard, Music, Cinema,
Sport, Game)
Sleep Timer Sets the length of time until
the TV to turns off
Audio or
Audio
Language
Changes the sound output.
Energy Saving Reduces the power con-
sumption by adjusting the
screen brightness. (Auto, Off,
Minimum, Medium, Maximum,
Screen Off)
AV Mode Sets the optimized image and
sound settings (Off, Cinema,
Game)
Skip Off/On Sets the Skip Off/On.
USB Device Eject a USB device.
The available menus and options may
differ from the input source that you are
using.
NOTE
3
Press Navigation buttons to scroll to the option
you want.
4
When you are finished, press Q. MENU.
The connected input sources display in black
and the disconnected input sources in grey.
- To add an input label, press the Green button.
You can easily identify a device connected to
each input source.
- If you connect a new external device to the
TV, a pop-up window appears. Select Yes on
the pop-up window to select an input source.
- To access the SIMPLINK, press the Red
button. If you select “SIMPLINK and On”, the
pop-up window for the HDMI input will not
display.
To Next Page
Loading...
