LG 32LW5500 - Entertainment; Connecting the TV to a Network; Connecting the Wired Network

ENTERTAINMENT
ENTERTAINMENT
Connecting the TV to a net-
work
Connecting the wired network
Connect the TV and a local area network (LAN)
via the LAN port as shown on the following illustra-
tion and set up the network settings.
If wired and wireless networks are both available,
wired is the preferred method.
After making a physical connection, a small
number of home networks may require the TV
network settings to be adjusted.
For detail information, contact your internet pro-
vider or router manual.
CAUTION
Do not connect a modular phone cable to the
LAN port.
Since there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
After connecting the LAN port, use the Pre-
mium or TV Apps menu. For more informa-
tion about Premium or TV App setup and
troubleshooting, visit http://lgknowledgebase.
com.
To set up the network settings,
1 Press HOME to access the Home menu.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to NET-
WORK and press OK.
4
Press the Navigation buttons to select Net-
work Setting and press OK.
5
If wired and wireless are simultaneously con-
nected, press the Navigation buttons to select
Wired and press OK.
6
If you already set Network Setting, select
Resetting. The new connection settings resets
the current network settings.
7
Select IP Auto Setting or IP Manual Setting.
- If selecting IP Manual Setting, press the
Navigation and Number buttons. IP address-
es will need to be input manually.
- IP Auto Setting: Selects if there is a DHCP
server on the local area network (LAN) via
wired connection, the TV will automatically
be allocated an IP address. If you’re using a
broadband router or broadband modem that
has a DHCP (Dynamic Host Configuration
Protocol) server function. The IP address will
automatically be determined.
- IP Manual Setting: Selects if there is no
DHCP server on the network and you want to
set the IP address manually.
When you are finished, press EXIT.
H/P
23
ENG