64
ENG
ENGLISH
CUSTOMIZING SETTINGS
PICTURE
OK
Move
Exit
●
Aspect Ratio : 16:9
●
Set 3D Video
●
Picture Wizard
●
Energy Saving : Auto
●
Picture Mode : Vivid
● Backlight
● Contrast 100
● Brightness 50
● Sharpness 70
● Colour 60
● Tint
50
● Colour Temp. 0
● Advanced Control
● Picture Resest
●
TruMotion : Low
●
Screen
R G
W C
●
LED Local Dimming : off
PICTURE Settings
1 Press HOME to access the Home menu.
2 Press the Navigation buttons to scroll to SETUP and press
OK.
3 Press the Navigation buttons to scroll to PICTURE and press
OK.
4 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
- To return to the previous level, press BACK.
5 When you are finished, press EXIT.
The available picture settings are described in the following.
Setting Description
Aspect Ratio Changes the image size to view images at its optimal size .
Picture Wizard Adjusts the image quality and calibrates the screen.
The customized options will be saved as Expert1 in the Picture Mode.
If you use Picture Wizard, the Energy saving feature will turn off automatically.
To reset changes made by Picture Wizard, operate Picture Reset when Picture Mode
is on Expert1.
In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness
values are not applied.
NOTE
Set 3D Video
(Only 3D models)
Sets the 3D imaging option.
Energy Saving Reduces the power consumption by adjusting the screen brightness.
When adjusting Energy Saving in MHEG/MHP mode, the Energy Saving setting is applied
after MHEG/MHP is finished.
Selecting ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.
When selecting Auto or Maximum, Backlight will not work.
NOTE
Option
Auto The backlight is adjusted automatically corresponding to the surroundings
when selecting Auto using the Intelligent sensor feature.
Off The Energy Saving is off
Minimum/Me-
dium/Maximum
Selects the brightness level.
Screen off The screen turns off in 3 seconds.
To Next Page
Loading...
