LG 32LW5500 - Setting up the TV; Desktop Pedestal Installation

8
ASSEMBLING AND PREPARING
Setting up the TV
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
Attaching the stand
1
Lay the TV with the screen side down on a flat
surface.
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage. Make sure not objects press
against the screen.
CAUTION
Tighten the screws firmly to prevent
the TV from tilting forward. Do not over
tighten.
CAUTION
2
Assemble the parts of the Stand Body with the
Stand Base of the TV.
4
3
Secure the TV and the stand with screws.
M4 x 12
Stand Base
DESKTOP PEDESTAL
INSTALLATION
1
Lift and tilt the TV into its upright position on a
table.
Stand Body
M4 x 12
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
2
Connect the power cord to a wall outlet.
Image shown may differ from your TV
For adequate ventilation allow a clearance of
10cm all around the TV.
Assembel the TV as shown.
ENG
ENGLISH